Network-technologies CAT5 Uživatelský manuál stáhnout pdf (Strana 45)

Network Configuration

This screen is only available in Matrix Mode (applicable when used with a PRIMUX Matrix Multi-User KVM Switch)- see

page 34 to change to Matrix Mode.

From the Administration Menu press <N> to get to the Network Configuration Menu. (From Command Mode press <A> - <N>.)

To enable the PRIMUX Matrix to be accessible via Telnet, the IP Address, Gateway, and DNS settings must first be configured.

Figure 40- Network Configuration page

Function Description Keystroke

IP Mode Toggle, using the <Spacebar> between “Static” or “DHCP”.

- In “Static” mode, the user must fill in all appropriate IP settings.

- In “DHCP” mode, the DHCP server will fill all IP settings in

automatically.

M-Spacebar

IP Address Open a field to enter an appropriate IP address (default is 192.168.1.22)

Subnet Mask Open a field to enter an appropriate subnet mask

Gateway Open a field to enter an appropriate gateway

Preferred DNS Open a field to enter a preferred DNS address

Alternate DNS Open a field to enter an alternate DNS address

Telnet Toggle telnet access between enabled and disabled

T- Spacebar

Help Open topic specific help page

---- Exit and return to the Administration Menu

Esc

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 53 54

Žádné komentáře

Network-technologies CAT5 Uživatelský manuál Strana 45